Amplifiers
Meatsmoke 300 Watt Tube Head  
Starting at: $2700

300 tube watts for bass or massive guitar 
All tube signal path powered by a sextet of 6550 
Loaded with overbuilt transformers and fan cooled 
2 footswitchable channels (switch included), normal channel ranging from smooth tubey cleans to punchy growl, od channel breaches growl into rich sustaining overdrive and all out low end fuzz at the top of the dial 
3 band eq, bass and treble shift controls, independent volume and master volume controls for each channel 
Supports 2, 4, and 8 ohm speaker loads 
Hand-wired, assembled and tested in Seattle, built with high quality components 
14 gauge cold rolled steel chassis housed in a ebony colored baltic birch enclosure dovetatiled together, satin lacquered, and logo branded
90 lbs 25.5"W x 10"H x 12"D

Options
200 watt version -$100 
100 watt version -$300 
Tube driven Jensen transformer coupled balanced XLR DI output +$250 
Effects Loop +$150 
1/3 Power switch +$50 
Custom Color Stain or Tolex +$100 (comes standard in ebony)



Loucks 100 Watt Tube Head   
Starting at: $2400 

100 tube watts driven by a quad of El34 
Ranging from thick full cleans with plenty of shimmer to thick classic rock growl 
Foot-switchable od boost drops additional gain for big distorted sounds (footswitch included) 
Versatile 3 band eq, presence control with independent preamp and master volumes for each channel 
Supports 4, 8, and 16 ohm speaker loads 
14 gauge cold rolled steel chassis housed in a dark walnut colored baltic birch enclosure dovetatiled together, satin lacquered, and logo branded
50lbs 25.5"W x 9"H x 12"D

Options
50 watt version -$100 
1/2 Power switch +$50 
Effects Loop +$150 
Tube Spring Reverb +$250 
Custom Color Stain or Tolex +$100 (comes standard in dark walnut)


Meatsmoke Preamp Rackmount 
Starting at: $1000
  
The MEATSMOKE preamp is voiced for bass guitar or huge guitar sounds, and features the MEATSMOKE's unique overdrive boost. 
Housed in a sturdy black aluminum 2U rackmount enclosure and sturdy brushed aluminum handles. 
2 footswitchable channels complete with independent Gain control, 3-band EQ, and Master Volume controls per channel. Clean channel ranges from big cleans to growl, while the overdrive channel picks up where the clean channel left off going from crunch to all out thick distortion roar. Footswitch included. 
Run the preamp's unbalanced 1/4" output into an independent power amp or into an effects loop return or the power amplifier input of a bass or guitar amp to completely transform the amp's sound. 
A Jensen transformer balanced XLR DI output provides thick clear signal direct to board. 
The dedicated record output includes a speaker simulating filter with two levels of intensity. This allows for running the PREAMP PEDALS directly into a mixing board, tape machine, or DAW. 
High-quality components are used throughout, including a regulated DC filament supply for quiet operation. Careful shielding and circuitry layout yield huge tone with a low noise floor.

Options
Skyhammer Preamp version +$100  


Meatsmoke Hybrid Amplifier  
Starting at: $1900 

1400 watts of class D power via dual 700 watt power amps (each power amp needs it's own speaker load to achieve the full 1400 watts available) 
Same tube preamp circuit as the 300 watt all tube meatsmoke circuit complete with footswitchable overdrive channel 
Supports speaker loads down to 4 ohms per power amp 
26lbs 21.5"W x 8"H x 12"D

Options
700 watt version -$200 
Tube driven Jensen transformer coupled balanced XLR DI output +$250 
Custom Color Stain or Tolex +$100 (comes standard in ebony)


Kalaloch Stereo Hybrid Amplifier
Starting at: $1950 

1400 watts (700 per side) of lightweight class D solid state power with a hand-wired tube preamp front end 
all tube clean preamp offers headroom and bandwidth making it a great platform for guitar, bass, keys, etc… works great with pedals 
each of the two preamps have independent inputs, volume and 3 band eq 
can be run in stereo mode where each input is driven separately into it’s own dedicated power amp 
can also be run in mono mode where channel 1 preamp feeds both power amps simultaneously for 1400 mono watts (each power amp needs it’s own speaker load to achieve the full 1400 watts available) 
14 gauge cold rolled steel chassis housed in a dark walnut colored baltic birch enclosure dovetatiled together, satin lacquered, and logo branded
25 LBS 22"W x 9"H x 12"D

Options
Custom Color Stain or Tolex +$100 (comes standard in dark walnut)


Skyhammer 100 Watt Tube Head   
Starting at: $2400 

100 tube watts driven by a quad of EL34 
High gain channel excels at heavy palm muting sounds and searing leads. 
Clean channel pushes clear chiming tones with a switchable crunch mode that enables medium gain classic rock overdriven sounds 
3 band eq, presence control, and independent preamp volume and master volume controls for each channel 
Tube buffered effects loop 
Supports 4, 8, and 16 ohm speaker loads 
14 gauge cold rolled steel chassis housed in a red mahogany colored baltic birch enclosure dovetatiled together, satin lacquered, and logo branded
50 lbs 25.5"W x 9"H x 12"D

Options
50 watt version -$100 
1/2 Power switch +$50 
Custom Color Stain or Tolex +$100 (Comes standard in Red Mahogany stain)


Coop 50 Watt Tube Head with Spring Reverb 
Starting at: $2100 

50 tube watts driven by a pair of 6L6 
Classic American guitar amp sounds, nice cleans and screams when pushed hard 
Tube driven long tank spring reverb 
3 band eq, bright switch pull knob, preamp volume, reverb level, and master volume control 
Supports 4 ohm load
14 gauge cold rolled steel chassis housed in a red mahogany colored baltic birch enclosure dovetatiled together, satin lacquered, and logo branded
40lbs 19"W x 9"H x 12"D

Options
1x12 combo amp version +$400 
Custom Color Stain or Tolex +$100 (comes standard in red mahogany)


Meatflip 100 Watt 115 Tube Bass Combo Amp 
Starting at: $2800 

100 tube watts via a quad of 6550 
Meatsmoke tube 2 channel preamp (see meatsmoke 300 watt amp for more info) 
15” eminence ceramic driver 
Lid flips and latches for portability 
Tube driven, Jensen transformer coupled balanced DI output 
Exposed transformers and tubes, protected by cage and retainers 
14 gauge cold rolled steel chassis housed in a red mahogany colored baltic birch enclosure dovetatiled together, satin lacquered, and logo branded
110 lbs 25"H x 22"W x 16"D

Options
Custom Color Stain or Tolex +$100 (comes standard in red mahogany)



Spaldo 15 watt Tube Head 
Starting at: $1500 

15 watts of class A tube power driven by a pair of EL84 
Tonal range from clean chime to rich overdrive via simple volume and tone controls with pull knobs for “bright” and “gain boost”. 
Shortest possible signal path from the guitar to the speaker for the biggest possible tonal range 
14 gauge cold rolled steel chassis housed in a dark walnut colored baltic birch enclosure dovetatiled together, satin lacquered, and logo branded
35lbs 19"W x 9"H x 12"D

Options
1x12 combo amp version +$400 
Custom Color Stain or Tolex +$100 (comes standard in dark walnut)



Meatsmoke Preamp Pedal 
Starting at: $850 

The MEATSMOKE dual channel preamp is voiced for bass guitar or huge guitar sounds, and features the MEATSMOKE's unique overdrive boost. 
Complete with Gain control, 3-band EQ, and Master Volume controls per channel. High and Low output modes allow for instrument-level use with a standard guitar or bass amplifier, or run directly into a power amplifier. Running one of the PREAMP PEDALS into an effects loop return or the power amplifier input of a bass or guitar amp can completely transform the amp's sound. 
The dedicated record output includes a speaker simulating filter with two levels of intensity. This allows for running the PREAMP PEDALS directly into a mixing board, tape machine, or DAW, without the need for heavy power amps or speaker cabinets. 
2 footswitchable channels complete with independent Gain control, 3-band EQ, and Master Volume controls per channel. Clean channel ranges from big cleans to growl, while the overdrive channel picks up where the clean channel left off going from crunch to all out thick distortion roar. Foot-switchable true-bypass switching also allows for stompbox-like functionality. 
Housed in a sturdy black steel enclosure, set between two side-panels of finished birch. High-quality components are used throughout, including a regulated DC filament supply. Careful shielding circuitry layout yield huge tone with a low noise floor.

Options
Skyhammer Preamp version +$100 
Custom Color Stain for panels +$30 (comes standard in dark walnut)


4x12 Speaker Cabinet 
Starting at: $1100 

Baltic Birch dovetailed, stained the color of you choice. On heavy duty removable casters alongside rubber feet and big recessed metal handles for easy transport. Loaded with 4 Warehouse Guitar Speakers ceramic 12” drivers, available in 4, 8, or 16 ohms.



2x12 Speaker Cabinet 
Starting at: $900 

Baltic Birch dovetailed, stained the color of you choice. Big recessed metal handles for easy transport. Loaded with 2 Warehouse Guitar Speakers ceramic 12” drivers, available in 4, 8, or 16 ohms.
Back to Top